How to choose a multimeter?
Digital, needle, digital screen? The choice is quite wide with regard to the multimeter. In addition, an individual and a professional will certainly not use the same type of device. In the following, you will find 4 important selection criteria for the multimeter.
Contents & Navigation
- How to choose a multimeter?
- Attention to the measuring range of the multimeter!
- 16 Best Digital Multimeter Picks For The Money
- 16 Best Fluke Digital Multimeter
- Fluke 376 FC 1000A Ac/Dc
- Fluke 117/323 KIT Multimeter and Clamp Meter
- Fluke 87-V Digital Multimeter
- Fluke 115 Compact True-RMS Digital Multimeter
- Fluke TL809 Electronic Test Lead Kit
- Fluke 115 Digital Multimeter
- Fluke 117 Electricians True RMS Multimeter
- Klein Tools MM700 Auto-Ranging 1000V
- Fluke 115 Compact True-RMS Digital Multimeter
- Fluke 115 Compact True-RMS – NIST-Traceable Calibration
- Fluke 117 Electricians True RMS Multimeter
- FLUKE 1587 FC 2-In-1 Insulation Multimeter
- Fluke 279FC Wireless TRMS Thermal Multimeter
- FLUKE-1587/I400 FC 2-In-1 Insulation Multimeter
- Fluke 1507 Digital Megohmmeter Insulation Resistance Tester
- Fluke 289 True-RMS Stand Alone Logging Multimeter
- Choose the multimeter according to the accuracy
- The measuring range of the multimeter
- What is the function of a multimeter?
- Choose the multimeter according to the protection
- Functionalities
- Choose the digital multimeter
Attention to the measuring range of the multimeter!
You must choose a device that has a large measurement range. So you can measure the voltage of a wide variety of electrical devices. Never go below Category III, as you will only be able to use your meter with small devices.
A category III appliance is used to measure the voltage of the electrical installation of the house. The measuring range is defined with templates. If you choose 450 V, the device will not be able to measure beyond 450 V.
16 Best Digital Multimeter Picks For The Money
16 Best Fluke Digital Multimeter
Fluke 376 FC 1000A Ac/Dc
- Connect your meter to your smartphone with Fluke Connect Measurements
- Read measurements on your phone at a safe distance, wearing less PPE while your meter takes all the risks
- Record results directly to your phone and the Cloud
- Capture intermittent faults while performing other tasks using the logging capabilities of the Fluke 376 FC
- Create and share reports from the field via email, or converse in real-time with ShareLive video calls
Fluke 117/323 KIT Multimeter and Clamp Meter
- The 117 multimeter measures AC and DC voltage as well as AC and DC amps. The 323 clamp meter measures AC and DC voltage as well as AC amps
- The 117 multimeter features true-rms for accurate measurements on non-linear loads
- The 117 multimeter features Low input impedance which helps prevent false readings due to ghost voltage
- The 323 clamp meter provides a true RMS AC voltage and current for accurate measurements on non-linear signals
- The 323 clamp meter measures 400 A AC current and 600 VAC and DC voltage
Fluke 87-V Digital Multimeter
- Accurate frequency measurements on adjustable speed drives (ASD) due to Fluke-designed low-pass filter
- Built-in thermometer allows temperature measurements without a separate thermometer
- Peak Min/Max allows capture of intermittents as fast 250 µS
- Dual display resolution - 6000 or 20,000 counts - lets you see small changes in displayed readings.CAT III 1000V, CAT IV 600V safety rated
- Measure up to 1000 VAC and DC
Fluke 115 Compact True-RMS Digital Multimeter
Fluke TL809 Electronic Test Lead Kit
- Two alligator clips with removable insulators
- Two plunger mini-hooks
- Does not include Holster
- Features true-rms for accurate measurements on non-linear loads
Fluke 115 Digital Multimeter
- Product Type: Multimeter
- AC Voltage accuracy: 2.0 percent + 3 (500 Hz to 1 kHz)
- AC max (Voltage): 600
- AC min (Voltage): 0.0001
- DC Voltage accuracy: 0.5 percent + 2
Fluke 117 Electricians True RMS Multimeter
- Does not include Holster
- Features true-rms for accurate measurements on non-linear loads
- Highly visible LED screen with white back light
- Designed for carrying a wide range of Fluke handheld test tools and accessories
- Top opens laterally to allow use of test tools without removing it from the case
- Velcro strap secures the test tools
Klein Tools MM700 Auto-Ranging 1000V
- Automatic ranging true root mean square (TRMS) technology for increased accuracy
- Measures up to 1000V AC/DC voltage, 10A AC/DC current and 40MΩ resistance plus temperature, capacitance, frequency, duty-cycle, diodes and continuity
- CAT IV 600V Safety Rating
- Built to withstand a 6.6-foot (2m) drop and withstand daily wear and tear on the job site
- Low Impedance (LoZ) mode for identifying and eliminating ghost or stray voltages
Fluke 115 Compact True-RMS Digital Multimeter
- True-rms for accurate measurements on non-linear loads
- safety rated
- Large white LED Backlight to work in poorly lit areas
- Operating Temperature -10 °C to + 50 °C Storage Temperature -40 °C to + 60 °C
- Check continuity, frequency, capacitance and diode test
- Measures 20 A (30 seconds momentary; 10 A continuous)
- True-RMS for accurate measurements on non-linear loads
- CAT III 600 V safety rated
- Large white LED backlight to work in poorly lit areas
Fluke 115 Compact True-RMS – NIST-Traceable Calibration
- Your unit is calibrated prior to shipment with a new nist-traceable calibration Certificate with data
- The NIST calibration provides you assurance your instrument Meets manufacturer's specifications. Your instrument is ready to Use day one meeting most quality system standards
- True-rms for accurate measurements on non-linear loads
- Cat III 600 V safety rated
- Large white LED Backlight to work in poorly lit areas
Fluke 117 Electricians True RMS Multimeter
- VoltAlert technology for non-contact voltage detection
- AutoVolt automatic AC/DC voltage selection. DC millivolts - Range : 600.0 mV, Resolution : 0.1 mV
- Low input impedance: helps prevent false readings due to ghost voltage
- Large white LED backlight to work in poorly lit areas
- True RMS for accurate measurements on non-linear loads.Operating temperature:-10°C to +50°C
FLUKE 1587 FC 2-In-1 Insulation Multimeter
- PI (polarity index) /DAR (dielectric absorption ratio) with Trend It graphs identifies problems faster
- Memory storage through mobile Fluke Connect Measurements App eliminates writing down results, reduces errors and saves data for historical tracking over time
- Temperature Compensation through App helps establish accurate baselines and relevant historical comparisons
- VFD low-pass filter for accurate motor drive measurements
- Insulation test voltages 50 V, 100 V, 250 V, 500 V, 1000 V
Fluke 279FC Wireless TRMS Thermal Multimeter
- Full-featured multimeter with built-in thermal imager
- 15 measurement functions including: AC voltage with low-pass filter, DC voltage, Resistance, Continuity, Capacitance, Diode test, Min/Max/Average, AC current (with iFlex), Frequency
- Thermal imaging reveals many electrical issues quickly and safely, eliminating the need for time-consuming testing and validation
- IFlex expands your measurement capabilities-get into tight, hard to reach spaces for current measurement (up to 2500 A AC)
- Fluke Connect compatible - Save measurements and images while communicating wirelessly with a smart phone up to 20 feet/6.1 m away (no obstructions)
FLUKE-1587/I400 FC 2-In-1 Insulation Multimeter
- Pl/DAR measurements with TrendIt graphs
- Memory storage through Fluke Connect Measurements app. CAT III 1000 V / CAT IV 600 V overvoltage rating for added user protection
- Temperature Compensation through Fluke Connect Measurements app
- Fluke i400 AC Current Clamp Use with your Fluke 1587 FC to measure 1A AC to 400 A AC
- 1 mA/Amp output guarantees easy reading
Fluke 1507 Digital Megohmmeter Insulation Resistance Tester
- Repetitive or hard-to-reach testing is easy with the remote test probe
- Live circuit detection prevents insulation test if voltage greater than 30-Volts is detected for added user protection
- Read measurements easily with large, backlit display
- Save both time and money with automatic calculation of polarization index and dielectric absorption ratio
- Make repetitive tests simple and easy with the 1507's Compare (Pass/Fail) function
Fluke 289 True-RMS Stand Alone Logging Multimeter
- Your unit is calibrated prior to shipment with a new nist-traceable calibration Certificate with data
- The NIST calibration provides you assurance your instrument Meets manufacturer's specifications. Your instrument is ready to Use day one meeting most quality system standards
- Stores up to 15,000 recorded events
- Real time clock for automatic time stamping of saved readings
- Large 50,000 count, 1/4 vga display with a white Backlight
Choose the multimeter according to the accuracy
All multimeters are accurate, but some are more accurate than others. The level of precision is usually indicated at the box level. For home use, an accuracy of at least 0.5% is required.
Read also >> The Best Portable Solar Charger to Reload Your Phone Ecologically!
Professionals use more powerful multimeters, but this level of precision is sufficient for an individual. Of course, you can buy a device with extreme precision if you can afford it.
Be aware that there are two types of multimeter value, including RMS and TRMS. The RMS or RMS value is suitable for DC currents while the TRMS or true mean value is for AC currents.
The measuring range of the multimeter
However, the choice of the measuring range can be made according to the use of the device.Indeed, it is not mandatory to have a large extent of measurement for occasional small work.
What is the function of a multimeter?
The multimeter is a device for measuring electrical properties. You can use it to check the electrical circuit of a car. It is used as a voltmetre, amperemeter or ohmmeter.
The device is also used as an AC tester. If you need to detect malfunctions in the engine or the battery of your car, you must use a multimeter.
Read also >> Philips Hue Review: New Connected Wellner LED Smart Lamps
Choose the multimeter according to the protection
Since the meter is designed to measure electrical current, it must be safe for the user. In principle, a good multimeter has a safety fuse to prevent the device from getting burned.
Do not forget that there are standards for multimeters. These must all meet the IEC 601010 standard. Never buy a device that does not comply with this standard.
To check this conformity, read the instruction manual that comes with the device or the information provided on the box or packaging.
Functionalities
Read also >> Dawn Simulator: The Sunrise Alarm Clock For Peacefull Wake Up
Choose the digital multimeter
The analog multimeter is not bad. The reading of data is easily done through a needle dial. It has been proven for years, but the digital multimeter has the advantage of being stronger.
In addition, the data is read through a digital screen. The digital multimeter is very suitable for first-time use and home use. You only use one command to access the different features of the device.
On this point, choose a multimeter that has the following features: resistance measurement, temperature measurement, automatic polarity support, diode and continuity tests. Logically, the more sophisticated the meter, the more expensive it will be. But, the price should never be a decisive criterion of choice.
Related Posts:
- Google Wifi: What Is The Google Router Worth?
- [Test] Google Home: More Than Promising Beginnings
- Philips Hue Review: New Connected Wellner LED Smart Lamps
- Is Green Energy Worth [$] To You? Discover Now! (Guide)
- The Best Portable Solar Charger to Reload Your Phone Ecologically!
- Best Digital Multimeter (Tester Voltmeter Ammeter)
- 36 Dawn Simulator: The Sunrise Alarm Clock For Peacefull Wake Up
- The Best Metal Detectors Of 2018 [Best Brands]
- Choose Your Metal Detecting Accessories Kit
- 10 Best Kids Metal Detector – On A Shoestring Budget
Disclosure: We may earn affiliate commissions at no cost to you from the links on this page. This did not affect our assessment of products.